Structural Drying Brisbane | Melbourne | Sydney | MouldPro


Quick Contact

Upload Images of your Mould

Structural Drying

Structural Drying

Structural Drying is removing excess moisture from wet surface that make up the structure. Drying wet buildings and properties involves removing trapped moisture from the building material used in the making like the drywall, lumber, concrete etc.

When you feel the premises is completely wet and needs immediate attention, you have to call us immediately before further damage as the problem arises when the drying process is too slow. The drying process needs to be fast otherwise water will migrate to previously unaffected building material, i.e. Secondary damage.

Did you know that moisture can damage any material or matter irrespective how well it is built. Extreme humid conditions, torrential downpours, storms etc can devastate your buildings and provide moulds an opportunity to grown further causing serious health implications.

The natural moisture level of any material is called dry standard. To remove excess moisture from the elements of a structure till they get back to their dry standard is what we call Structural Drying.

If your house in Sydney is suffering from extreme moisture as a result of flood or other weather conditions, our professional structural drying service is what you need. We provide with the best Structural Drying Services in Sydney.

We use the following steps to ensure your building is returned to its proper state

  • Water Removal

The first thing that our expert team will take care of is removal of any excess water. We use pumps to do the same and even remove water traces from your carpets. We make sure that this step is followed to expediate the process. Relying only on ventilation can slow it down and also be less effective.

  • Evaporation

Once the standing water is removed, we use high power fans to increase air-flow and evaporate the dampness from all surfaces.

  • Dehumidification

In this step, whatever water is still left on the surfaces is converted into a gas by a process called Dehumidification.

  • Temperature Management

Managing a steady temperature is imperative. Aim for between 70 and 90 degrees Fahrenheit. Don’t make it too hot also, otherwise it can affect the equipment.

Rot, rust, decay are some of the examples of the kind of damage excessive moisture can lead to and having a professional service gives you the benefit of having an experienced team to hand guide the process.

Failure to remove excessive nature can lead to major complications. Rot, rust, and decay are examples of the damage that can occur if materials aren’t properly treated.

Having access to the proper equipment is the only way to get the job done efficiently and effectively.

For other services like, Mould Removal & Prevention, Rising Damp Removal, Sub-Floor Ventilation, Flood Restoration and, Odour Neutralisation in Sydney, reach out to us. We provide with the best in class services for mould removal and damages in Sydney amongst others.

Structural Drying Process Involves:

  • Water removal by pumping
      1. Draining the water out
      2. Mopping the wet floor
      3. Removing damp
      4. Air Movement
      5. Dehumidification

Why Choose Us:

  • We have the Knowledge – In place drying
  • On Site inspection and Decision
  • Advanced Equipment to carry out the work efficiently
  • We restore your peace of mind

When you’re facing the aftermath of a water disaster at your home or business, you can count on Mould Pro to explain our processes from start to finish. We continually develop and fine-tune our services to restore both your property and your peace of mind.

Expert Structural Drying Services in MelbourneBrisbaneSydneyAdelaideGold CoastSunshine Coast, Central Coast & Newcastle.


Call us on 1300-662-938 to book Structural Drying Services

Book Inspection